previous next Up Title Contents

Tests/Utilities


IterRip1.par
	2		Iterations number
	IRSO	Iterated ripple mode: "IRSO" - add original, "IRSS", add-same.
	4e-3	delay (s).
	-1		Signal multiplier (Gain).
	

Meddis86.par
	100.0		Permeability constant A (units per second).
	6000.0		Permeability constant B (units per second).
	2000.0		Release rate (units per second).
	5.05		Replenishment rate (units per second).
	2500.0		Loss rate (units per second).
	66.31		Reprocessing rate (units per second).
	6580.0		Recovery rate (units per second).
	1.0			Max. no. of transmitter packets in free pool.
	50000.0		Firing rate (spikes per second).
	

PTone1.par
	1000.0		Stimulus frequency (Hz).
	20.0		Stimulus signal intensity (dB SPL).
	500.0e-3	Stimulus signal duration (seconds).
	0.25e-3		Stimulus sampling interval, dt (seconds).
	

PTone2.par
	100.0		Stimulus frequency (Hz).
	20.0		Stimulus signal intensity (dB SPL).
	50.0e-3		Stimulus signal duration (seconds).
	0.25e-3		Stimulus sampling interval, dt (seconds).
	

PTone3.par
	1000.0		Stimulus frequency (Hz).
	40.0		Stimulus signal intensity (dB SPL).
	50.0e-3		Stimulus signal duration (seconds).
	0.25e-3		Stimulus sampling interval, dt (seconds).
	

PTone4.par
	1000.0		Stimulus frequency (Hz).
	40.0		Stimulus signal intensity (dB SPL).
	50.0e-3		Stimulus signal duration (seconds).
	0.05e-3		Stimulus sampling interval, dt (seconds).
	

PTone5.par
	1000.0		Stimulus frequency (Hz).
	40.0		Stimulus signal intensity (dB SPL).
	5.0e-3		Stimulus signal duration (seconds).
	0.05e-3		Stimulus sampling interval, dt (seconds).
	

PTone6.par
	5000.0		Stimulus frequency (Hz).
	60.0		Stimulus signal intensity (dB SPL).
	200.0e-3	Stimulus signal duration (seconds).
	0.02e-3		Stimulus sampling interval, dt (seconds).
	

PreEmph1.par
	1		Filter order.
	0.0		Pre-attenuation for filter (dB).
	0.0		Lower, 3 dB down cut-off frequency (Hz).
	2000.0	Upper, 3 dB down cut-off frequency (Hz).
	

PreEmph2.par
	2		Filter order.
	0.0		Pre-attenuation for filter (dB).
	450.0	Lower, 3 dB down cut-off frequency (Hz).
	8500.0	Upper, 3 dB down cut-off frequency (Hz).
	

PulseTr1.par
	360			Pulse rate (s).
	0.1e-3		Pulse duration (s).
	2.39		Stimulus signal amplitude (arbitary units).
	20.0e-3		Stimulus signal duration (s).
	0.1e-3		Stimulus sampling interval, dt (seconds).
	

PulseTr2.par
	360			Pulse rate (s).
	0.1e-3		Pulse duration (s).
	2.39		Stimulus signal amplitude (arbitary units).
	20.0e-3		Stimulus signal duration (s).
	0.1e-3		Stimulus sampling interval, dt (seconds).
	

RedceCh1.par
	#
	# Parameter file for the AveChannels utility module.
	#
	
	Average Mode - "average" or simple "sum".
	1		Number of channels signal is to be averaged to.
	

RedceDt1.par
	#
	# Parameter file for the ReduceDt module.
	#
	
	2		Reduction denominator.
	

Refract1.par
	1.0e-3	Refractory period (seconds).
	

Sample1.par
	3e-3		Time offset (s).
	1.0e-3	Sampling interval (s).
	

SelecCh1.par
	remove	Selection mode - "zero" or "remove".
	10		No. of frequencies to be selected.
	
	# Selection array 0 = off, 1 = on.
	1
	0
	1
	0
	1
	0
	1
	0
	1
	0
	

ShapePu1.par
	0.0		Event threshold (units).
	0.2e-3	Pulse duration (s).
	3.8		Pulse magnitude (nA?).
	

SimSpec1.par
	# Misc. parameters.
	on		Diagnostics mode ("OFF" or "ON").
	2.5e-3	Ramp rise time for stimuli (s)
	
	# Module Specifications
	
	begin {
	
		Harmonic				< Hrmonic1.par
		Utility_SimulationSpec 	< SimSpec2.par
		reset	fibres
		repeat 500 {
			ANSpikeGen_Simple			< SpikeGn1.par
			fibres% Utility_Accumulate	< dummy.par
		}
		Analysis_ACF			< AutoCorr2.par
		Display_Signal			< Display1.par
	
	}
	 - any old nonsense, as nothing else should be read at this point.
	

SimSpec2.par
	# Misc. parameters.
	on		Diagnostics mode ("OFF" or "ON").
	2.5e-3	Ramp rise time for stimuli (s)
	
	# Module Specifications
	
	begin {
	
		PreEmphasis_BandPass	< PreEmph2.par
		BasilarM_GammaT			< GammaT1.par
		IHC_Meddis86			< Meddis86.par
	
	}
	 - any old nonsense, as nothing else should be read at this point.
	

BPTone2.par
	# Frequency	Intensity
	#	(Hz)	  (dB SPL)
		100.0		20		Left stimulus.
		100.0		20		Right stimulus.
	
	180.0		Phase difference between channels (degrees).
	50.0e-3		Stimulus signal duration (seconds).
	0.25e-3		Stimulus sampling interval, dt (seconds).
	

StepFun1.par
	20.0		Stimulus signal amplitude (arbitary units).
	10.0e-3		Stimulus signal duration (s).
	10.0		Begin-end period amplitude (arbitrary units).
	2.0e-3		Stimulus period before the signal begins (s).
	5.0e-3		Stimulus period after the signal ends (s).
	1.0e-3		Stimulus sampling interval, dt (seconds).
	

StepFun2.par
	20.0		Stimulus signal amplitude (arbitary units).
	100.0e-3	Stimulus signal duration (s).
	0.0			Begin-end period amplitude (arbitrary units).
	2.0e-3		Stimulus period before the signal begins (s).
	5.0e-3		Stimulus period after the signal ends (s).
	1.0e-3		Stimulus sampling interval, dt (seconds).
	

WNoise1.par
	1				Number of channels.
	-1				Degree of correlation between the noise at the left and right channels.
	12				Randomization index.
	-1				Randomization seed.
	0.0001			Intensity (dB SPL).
	10e-3			Duration (s).
	0.05e-3	Sampling interval (s).
	

WNoise2.par
	1			Number of channels.
	-1			Degree of correlation between the noise at the left and right channels.
	12			Randomization index.
	-1			Randomization seed.
	0.0001		Intensity (dB SPL).
	50e-3		Duration (s).
	0.1e-3		Sampling interval (s).
	

SpikeGn1.par
	-1		Random number seed.
	1		Number of fibres.
	0.05e-3	Pulse duration (s).
	1.0		Pulse magnitude (nA?).
	1e-3	Refractory period (seconds).
	

Hrmonic2.par
	#  Stimulus generation parameters for a harmonic stimulus
	
	100			Stimulus fundamental frequency (Hz).
	1			Lowest harmonic number.
	60			Highest harmonic number.
	
	#  Mistuning one harmonic
	-1			Mistuned harmonic number (0= F0, -1 implies none mistuned).
	40			Mistuning factor (%).
	
	#  Phase relationships among harmonics
	sine		Phase mode (SINE, COSINE, RANDOM, SCHROEDER, ALTERNATING).
	1			Random number seed.
	
	#  Frequency modulation
	2.5			modulation Frequency (Hz).
	0			modulation Phase (degrees).
	0			modulation Depth (%).
	
	#  Bandpass filter
	0			Order
	200			LowCutFreq  3 dB down
	600			HighCutFreq 3 dB down
	
	#  Intensity, duration, dt
	60.0		Stimulus signal intensity (dB SPL).
	100e-3		Stimulus signal duration (s).
	0.05e-3		Stimulus sampling interval, dt (seconds).
	
	

Delay1.par
	#Delay1.par
	# For binaural signals with +ve delays R is delayed relative to L (s).
	
	SINGLE	operation mode ("single" or "linear").
	1e-3	Initial time delay (s).
	3e-3	Final time delay (not used with "single" mode).
	

GammaTL4.par
	4			Order for the gamma tone filters - BM model.
	USER		Centre frequency mode for filter.
	2			No. of centre frequencies.
	100
	100
	
	ERB			Band width (3 dB down) mode for filters.
	

CBinITD1.par
	#CBinITD1.par
	
	2e-3	Inter-aural time delay: +ve R is delayed relative to L (s).
	

BPTone3.par
	# Frequency	Intensity
	#	(Hz)	  (dB SPL)
		100.0		20		Left stimulus.
		100.0		20		Right stimulus.
	
	0.0			Phase difference between channels (degrees).
	50.0e-3		Stimulus signal duration (seconds).
	0.25e-3		Stimulus sampling interval, dt (seconds).
	



previous next Up Title Contents