previous next Up Title Contents

Tests/Analysis


AMPTone1.par
	5000.0		Stimulus carrier frequency (Hz).
	200.0		Stimulus modulation frequency (Hz).
	100.0		Stimulus percent amplitude modulation.
	20.0		Stimulus signal intensity (dB SPL).
	50.0e-3		Stimulus signal duration (seconds).
	0.01e-3		Stimulus sampling interval, dt (seconds).
	

AutoCor1.par
	# The autocorrelation is calculated backwards from the time, t0, for
	# a period, t.  An exponential decay function is included with the
	# time constant, tw.
	
	0		Normalisation mode standard or unity (0, or 1).
	-1.0	Time offset, t0 (if -ve the end of the signal is assumed) (s).
	2.5e-3	Time constant, tw (s).
	7.5e-3	Autocorrelation period, t (s).
	

Average1.par
	full		Average mode specification (full, -wave or +wave).
	0.0e-3		Time offset for start of averaging period (s).
	-1e-3		Averaging period (s).
	

BPTone1.par
	# Frequency	Intensity
	#	(Hz)	  (dB SPL)
		1000.0		20		Left stimulus.
		1000.0		20		Right stimulus.
	
	180.0		Phase difference between channels (degrees).
	30.0e-3		Stimulus signal duration (seconds).
	0.05e-3		Stimulus sampling interval, dt (seconds).
	

Click1.par
	6.0e-3		Time for the delta-function click (s).
	70.7		Stimulus signal amplitude (dB).
	12.5e-3		Stimulus signal duration (seconds).
	0.05e-3		Stimulus sampling interval, dt (seconds).
	

CrossCo1.par
	# The cross-correlation is calculated fro -t to t from the time, t0.
	# An exponential decay function is included with the
	# time constant, tw.
	
	15.0e-3	Time offset, t0 (s).
	2.5e-3	Time constant, tw (s).
	7.5e-3	Maximum lag period, t (s).
	

FindBin1.par
	max_index	search mode (MAX_VALUE, MAX_INDEX, MIN_VALUE, MIN_INDEX).
	-1			Bin width (time window) for bin (s).
	0.0			Time from which to start search (s).
	-1.0e-3		Time range search (s).
	

FindInd1.par
	maximum		Index search mode ("minimum" or "maximum").
	0.0e-3		Time offset for start of search (s).
	
	

GammaT2.par
	4			Order for the gamma tone filters - basilar membrane model.
	single		Centre frequency mode for filter.
	1000.0		Initial centre frequency of gamma-tone filter bank.
	ERB			Band width (3 dB down) mode for filters.
	

Histogm1.par
	continuous	Detection mode - spike (detection) or continuous (signal).
	PH			Histogram type - PSTH or PH.
	0.5			Event threshold for bin counts (units as appropriate).
	0.01e-3		Bin width for the histogram (s).
	1e-3		Period for period histogram (s).
	0.0e-3		Offset for period histogram (s).
	
	

Histogm2.par
	continuous	Detection mode - spike (detection) or continuous (signal).
	PSTH		Histogram type - PSTH or PH.
	0.5			Event threshold for bin counts (units as appropriate).
	0.05e-3		Bin width for the histogram (s).
	1e-3		Period for period histogram (s).
	0.0e-3		Offset for period histogram (s).
	
	

Intens1.par
	0.0		Time from which to start calculation (s).
	
	

IntrSIH1.par
	-1		Order of spike interactions (1 = 1st, 2 = 2nd, -1 = unlimited).
	0.0		Event threshold (arbitrary units).
	-1		Max. interval for inter-spike interval histogram (s).
	
	

MPTone1.par
	3			Number of pure tones.
	#
	#Frequency	Intensity	Phase
	#(Hz)		(dB SPL)	(degrees)
	100.0		20.0		0.0			First pure tone.
	200.0		20.0		0.0			Second pure tone.
	300.0		20.0		0.0			Third pure tone.
	#
	100.0e-3	Stimulus signal duration (seconds).
	0.25e-3		Stimulus sampling interval, dt (seconds).
	

PTone1.par
	1000.0		Stimulus frequency (Hz).
	20.0		Stimulus signal intensity (dB SPL).
	50.0e-3		Stimulus signal duration (seconds).
	0.05e-3		Stimulus sampling interval, dt (seconds).
	

PTone2.par
	100.0		Stimulus frequency (Hz).
	-40.0		Stimulus signal intensity (dB SPL).
	4.0e-3		Stimulus signal duration (seconds).
	0.01e-3		Stimulus sampling interval, dt (seconds).
	

PTone3.par
	3000.0		Stimulus frequency (Hz).
	-26.0		Stimulus signal intensity (dB SPL).
	50.0e-3		Stimulus signal duration (seconds).
	0.01e-3		Stimulus sampling interval, dt (seconds).
	

PTone4.par
	1000.0		Stimulus frequency (Hz).
	1.0			Stimulus signal intensity (dB SPL).
	5.0e-3		Stimulus signal duration (seconds).
	0.1e-3		Stimulus sampling interval, dt (seconds).
	

PreEmph1.par
	4		Filter order.
	450.0	Lower, 3 dB down cut-off frequency (Hz).
	8500.0	Upper, 3 dB down cut-off frequency (Hz).
	

PulseTr1.par
	360			Pulse rate (s).
	0.1e-3		Pulse duration (s).
	2.39		Stimulus signal amplitude (arbitary units).
	20.0e-3		Stimulus signal duration (s).
	0.1e-3		Stimulus sampling interval, dt (seconds).
	

SpikeRg1.par
	0.0   	Event threshold (arbitrary units).
	0.2e-3	Bin width for spike events (s).
	0.0e-3	Time offset for start of analysis (s).
	-1		Max. time range: -1 = end of signal (s).
	0.0		Refractory period or dead time - set to 0 for standard CV (s).
	
	


previous next Up Title Contents