previous next Up Title Contents

Process lines

Each process in the simulation specification is described by a single line, e.g.

# A simple simulation specification

begin {

PureTone < PTone1.par # Stimulus module

Analysis_ModulusFT

}

Figure [28] Example 1

The example in figure [28] generates a pure tone, which is then fourier transformed. Each process line contains the module name, followed by the respective file name from which the module's parameters are to be read. These two elements of the process line are separated by the less-than, "<" character-indicating the direction of parameter"flow". Modules which do not have any parameters need not have the less-than, "<" character or the parameter file name, as shown by the second line in the simulation specification example.


previous next Up Title Contents